- 4 -
Handling of ink cartridges
•
Ink is organic solvent.
If ink settles on the skin or clothes,
immediately wash it off with
detergent or water.
If you get ink in your eyes,
immediately wash your eyes with a
lot of clean water for at least 15
minutes. In this case, also wash the
backside of eyelids to rinse ink away
completely. Then, consult a doctor
as soon as possible.
•
Store ink cartridges and waste ink
tank in a place that is out of the
reach of children.
•
Never refill the ink cartridge with ink.
MIMAKI assumes no responsibility
for malfunction caused by using the
device after replenishment of ink.
During assembly
•
The pack of the device is as heavy
as approximately 200 kg.
Perform the assembly work by at
least four persons.
Do not disassemble or remodel the device.
•
Never disassemble or remodel the
main unit of the printer and the ink
cartridge. Disassembling/remodeling
any of them will result in electric
shocks or breakdown of the device.
WARNING
Do not use the device in damp places.
•
Avoid damp environments when
putting the device into service. Do
not splash water onto the device.
High-humidity or water will give rise
to fire, electric shocks or breakdown
of the device.
Abnormal event occurs.
•
If the device is used under an
abnormal condition where the device
produces smoke or unpleasant smell,
fire or electric shocks can result. Be
sure to turn off the power switch
immediately and detach the plug
from the receptacle. Check first to be
sure that the device no longer
produces smoke, and contact a
distributor in your district for repair.
Never repair your device by yourself
since it is very dangerous for you to
do so.
Power supply and voltage
•
Be sure to use the device with the
power supply specifications
indicated.
•
Be sure to connect the plug of the
power cable to a grounded
receptacle.
If not, fire or electric shocks can
result.
Handling of the power cable
•
Take care not to damage, break or
work on the power cable.
•
If a heavy matter is placed on the
power cable, heated or drawn, the
power cable can break to cause fire
or electric shocks.
