- 3.17 -
When using the plotter in an extremely dusty or dry place [REFRESH]
Solidification of ink can be prevented by refreshing the head during printing.
If the plotter is used in a dusty place or dry place, ink in the head will be likely to solidify.
Execute the REFRESH function to enable the ink to be ejected properly from the ink head.
Concerning the frequency of refreshing of the ink nozzle, there are four levels—Levels 0 to 3.
LEVEL 0 :
Frequency of refreshing is low.
LEVEL 1 :
Frequency of refreshing is normal.
LEVEL 2 :
Frequency of refreshing is slightly high.
LEVEL 3 :
Frequency of refreshing is high.
STEPS:
1.
Select a type. (See page 3.3)
Here, select [Type.1].
2.
Press the [ENTER] key.
3.
Press the JOG keys [ ] and [ ] to select
[REFRESH].
4.
Press the [ENTER] key.
5.
Press the JOG keys [ ] and [ ] to s
et a refresh
level.
There are four refresh levels from which you can select.
[LEVEL0], [LEVEL1], [LEVEL2], [LEVEL3]
Here, select [LEVEL2].
6.
Press the [ENTER] key.
7.
Press the [END] key twice.
The menu returns to the LOCAL mode.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A
CO M P . < e n t >
T Y P E 1
R E F R E S H
< e n t >
T Y P E 1
R E F R E S H
: L E V E L 1
T Y P E 1
R E F R E S H
: L E V E L 2
T Y P E 1
R E F R E S H
< e n t >
< < L O C A L > >
w i d t h : 1 2 7 2m m
Summary of Contents for DS-1600
