MIMAKI DS-1600, Operation Manual

Page: 112 / 172

- 4.2 -
Maintenance of the plotter
The term “maintenance” as used herein refers to the operation that has to be performed to
keep the plotter in good operating condition.
To carry out maintenance of the plotter, select [MAINTENANCE] from the function menu and
make the necessary settings.
Function menu [MAINTENANCE]
The table, below, shows the tree structure of the function menu [MAINTENANCE].
In order to use the application functions of the plotter, it is necessary to understand the proper
sequence of key operations.
[FUNCTION]
See Chapter 2 “How to use the basic functions.”
SET UP
[FUNCTION]
LIST
MAINTENANCE
DATA DUMP
PRINT adjust PRINT START PATTERN 1 to 7 Adjust value: -15 to 15
STATION CARRIAGEout, WIPER EXCHG, NOZZLE WASH, DRAIN WASH, STRAGE WSH
CARRIAGE CARRIAGEout
HEAD HEIGHT
FILL UP INK Select Head Loading operation
INK CHANGE Sub, TPig
USE HEAD ALL, FRONT, REAR (Displayed at the time of setting for 1-way high-speed printing.)
STRETCH CHECK PATTERN 50%, 100%, 200%, 300%
PASS 4 pass, 8 pass
COLOR 1A, 2B, 3C, 4D, 5E, 6F, 7G, 8H
ROUTINE CONTROL ROUTINE FLUSHING OFF, ON 1 to 24H
ROUTINE CLEANING OFF, ON 1 to 48H
MACHINE SET NAME
INFORMATION VERSION
SERIAL NO.
[FUNCTION]
See Chapter 2 “How to use the basic functions.”
DISPLAY