MIMAKI CJV150-107, Service Documents, Page: 7 / 56

© 2014 MIMAKI ENGINEERING CO.,LTD. 1.1 P.2
1.1 Constitution and Rules
1
2
3
4
A-3) Format of Explanatory Page
 Header

Indicate the heading flow to the section.

Indicate the model name of machine.

Indicate the date of issue of the section.

Indicate the date of revision of the section.

Indicate the oldest firmware version to which the section relates.

Indicate additional information, such as the related serial number.

Indicate the revision number of the section.
• For a minor change (correction of text or change of names of
parts), raise the number at the first decimal place.
Example: 1.0

1.1
• For a major change (change in specifications or modification
to drawings), raise the number at the ones place.
Example: 1.0

2.0

Indicate the title of item with the item number.
 Index

Indicated the chapter number, as a reference at document
retrieving.
 Footer

Indicate Copyright at the bottom left of the page. Indicate the
year of the first release of the document.
At the bottom right of page, indicate the item number, revision
number and page number.
 Description
The basic format of the explanation is as follows:
• Use the same font of the same size for the characters on the
page excluding the header, footer and index.
• Use only black for the characters on the page excluding those
for drawings, header, footer and index.
• Locate the general drawing for adjustments or disassembly
and reassembly, if any, in the upper area of the page. ( )
• Locate the drawings in the left area and the text in the right area. ( )
• Do not use any drawings other than line drawings, except
when photos are appropriate for, say, cables.
• Enclose each symbol such as “Warning”, “Caution”, “Important”
or “Tips” and the explanatory text with a rectangular box. ( )
• Use “[ ]” and “->” when an operation function is to be shown
in the text of this document.
Example: [FUNCTION] -> [#ADJUST] -> [HEAD
ADJUST] -> [SLANT ADJUST]
• Do not use any trademarks or trade names of other companies
to name tools or parts.
Example: INSULOK, LOCTITE
• In the explanatory text, use the same names of parts as those in
“MECHANICAL DRAWING”, and use bold characters for them.
• Express the explanatory text as briefly as possible.
• Avoid a redundant description of the same information or procedure.
R.1.0
Service Documents > Constitution and Rules
Model CJV150/300 Issued 2014.09.15 Revised F/W ver Remark
1.0
Rev.