MIMAKI CF3-1610, Operation Manual

Page: 48 / 166

1-34
Matching the PC Specifications
This section describes how to set up the functions to connect to a PC.
Setting the Communication Conditions
RS-232C Connection
Setting the communication conditions for an RS-232C connection to the PC.
1
Display the third page of the local menu.
• Press several times.
2
Press and select [INTERFACE.]
3
Press and select [RS-232C].
4
Select the [BAUD RATE] and [DATA BITS] set values.
BAUD RATE setting : Press to select the set value (1200, 2400, 4800, 9600, 19200 (bps)).
DATA BITS setting : Press to select the set value (7 or 8(bits)).
• The * mark indicates the current set value.
5
Press .
• Display the second page of [INTERFACE].
• The unit will automatically recognize its interface to the PC.
• The interface to the PC that first received the data is recognized, and the selection is cancelled with the
Data Clear operation. ( P.2-34)
Item Set value
BAUD RATE 1200, 2400, 4800, 9600, 19200 (bps)
DATA BITS 7, 8 (bit)
PARITY NON , ODD , EVEN
STOP BITS 1, 2 (bit)
HANDSHAKE HARD, X CODE, E/A
*1
, SOFT
*1
*1. E/A (ENQ-ACK) and Software can be selected with the MGL-IIC3 command selected in the
operation mode command settings.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
< I NT ERF ACE >
I NT ERF ACE SE L ECT
RS - 2 3 2C>
* USB >
< I NT ERF ACE > R 1 / 2
RESERVE
BAUD RA TE
9 6 0 0 >
DAT A B I TS 8 >
< I NT ERF ACE > R 2 / 2
PAR I TY NON>
S TOP B I TS 1 >
HANDSHAKE HARD>