MIMAKI CF3-1610, Operation Manual

Page: 17 / 166

1-3
1
Setup
Names and Functions of Parts
Main Unit
Name Function
(1)
Y bar Moves the head in the Y direction.
(2)
Electrical box Contains PCBs and other electronics.
(3) Head Holds a variety of tools. The mountable tool depends on the head.
(4) Area sensor
Checks whether there is an obstruction between the left and right area sensors of the Y
bar.
The power will be turned OFF automatically when an obstruction is detected.
(5)
Work guide plates Guides for mounting the workpiece. ( P.1-16)
(6)
Blower Unit
(option)
Provides vacuum adhesion of the workpiece on the cutting panel.
(7) Adjustable feet Adjust the leg height to maintain the cutting panel surface horizontal.
(8) Operation panel Makes the settings required for the unit. ( P.1-8)
(9)
EMERGENCY switch Press in the event of an emergency. The power is forcibly cut to stop unit operation.
(10)
Origin position mark Indicates the maximum effective cutting area.
(11)
Cutting panel
Holds the workpiece. It offers a regular array of small holes for vacuum adhesion.
(
P.1-16)
(1)
(11)
(10)
(2)
(3)
(7)
(8)
(6)
(5)
(9)
(4)
(4)