MIMAKI CF3-1610, Operation Manual

Page: 146 / 166

6-12
9
Check and adjust the test pattern.
• Press or to make the adjustments.
Set values :- 9.8° ~ + 9.8°
• For details, see “Circle
θ
Correction Method” at the bottom of the page.
10
Press several times to display the
third page of the menu.
11
Press to start drawing the test pattern.
• Draw the [50 < R <100] and [R > 100] test patterns.
12
Check and adjust the test pattern.
• Press or to make the adjustments.
Set values :- 9.8° ~ + 9.8°
• For details, see “Circle
θ
Correction Method” at the bottom of the page.
13
Press to save the adjusted values.
• Press if you do not want to save the settings.
Circle
θ
Correction Method
End point displaced inward End point displaced outward
<C I RCL E
θ
> 3 / 4
5 0 <R< 1 0 0 + 0 . 0 ° >
R> 1 0 0 + 0 . 0 ° >
T ES T PA T T ERN - >
Set the offset angle to a
positive value.
Set the offset angle to a
negative value.