2
ENGLISH
PFH 20 E, PFH 20 QE, PFH 24 QE
Always disconnect the plug from the socket before carrying out any work on the
machine.
The following tools can be inserted in the drill-hammer chuck using the SDS-plus
shank:
– Hammer-drill for concrete and brickwork
– Adapter for geared drill chuck or
screwdriver bits
Only use accessories with SDS-plus shank!
1.
Clean and grease the shank of the bit.
Special grease can be obtained as
accessory
2.
Push bit into chuck turning it slightly, the
chuck locks the bit in to the chuck
automatically.
3.
Check that the bit is properly locked into
place. It must be possible to move it back
and forth.
Brief description
Built-in safety clutch helps prevent the machine from
rotating if the drill bit jams.
Hammer drilling chuck for bits and
accessories with SDS-plus reception – tools
are locked automatically after insertion.
Selector lever for switching between
drilliing and hammer drilling.
Fully insulated gear box for long durability and protection
from electric shock.
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our products,
technical specifications are subject to alteration without prior
notice.
Ergonomically designed housing
with soft grip.
Auxiliary handle, has an integral
depth gauge and can be rotated in
various positions.
Lock button for switch locking
Switch trigger for switching the
machine on and off, and for smooth
starting and varying speed. (Depending
on equipment)
Quick–Lok – fast exchange of power
supply cables for the use of different
cable lengths or for fast replacing of
defect cables. (Depending on equipment)
Reversing lever for changing
from forward to reverse rotation –
due to a lockout mechanism,
switching the lever is only
possible if the On-/Off switch is
not depressed.
Tool reception
Inserting tools
