GENERAL OPERATIONS
11
6. GENERAL OPERATIONS
6.1. BATTERY MANAGEMENT
The meter is supplied with 3 x 1.5V alkaline AA batteries.
To replace the batteries, follow the next steps:
1. Turn the meter off.
2. Remove the 4 screws on the back of the meter to open the
battery compartment.
3. Remove the old batteries.
4. Insert the three new 1.5V AA batteries while paying attention
to their polarity.
5. Close the battery compartment using the 4 screws.
Note: The meter is equipped with Battery Error Prevention
System (BEPS) which automatically switches the meter off if
battery level is not adequate to guarantee an accurate reading.
