20
MW190
Bench Meter
12. SETUP
Setup mode allows viewing and modifying the following parameters:
y
Salinity Compensation
y
Altitude Compensation
y
Current Time (hh:mm)
y
Current Date (MM.DD.YYYY)
y
Beep Status
y
Baud Rate (serial communication)
y
Instrument ID
y
Temperature Unit
To enter SETUP mode, press and hold the SETUP key for about 1 second while in normal
measurement mode.
Select the desired setup parameter using the UP and DOWN arrow keys.
Press the CAL key if you want to change the item value. The selected item (e.g. hour, in
setting up the correct time) and “ACCEPT” tag will start blinking.
Press the arrow keys to change the displayed value.
If there is another item to be set (e.g. minutes), press the RANGE key. The other item will
start blinking.
Press the arrow keys to change the displayed value.
Press the ACCEPT key to accept the value or the CAL key to escape.
