3
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
SPECIFICATIONS
Cat. No. ................................................ M18 HOAL
Battery Type .................................................M18™
Charger Type................................................M18™
AC Input Volts .................................... 220-240V AC
AC Input Amps.................................................
50W
DC Input Amps................................................. 36W
DC Input Volts............................................. 18V DC
Hertz .........................................................
50-60 Hz
Recommended Ambient
Operating Temperature .................... -17°C to 51°C
EXTENSION CORDS
Read Operator's Manual
Do not stare at the
operating light source.
Regulatory Compliance mark
(RCM). This product meets
applicable regulatory
requirements.
Do not dispose of electric tools
together with household waste
material. Electric tools and
electronic equipment that have
reached the end of their life must
be collected separately and
returned to an environmentally
compatible recycling facility.
Extension cords should be selected with care.
Before use, the extension cord should be carefully
inspected to ensure there is no damage to the
cord, plug or connector. Replace a damaged
extension cord immediately or have it repaired by a
qualified electrical worker.
Select an extension cord suitable for the job.
Having excess length of cord can present an
unnecessary trip hazard.
Select a suitable cord for the product. Ensure that
the light and cord are not exposed to water, sharp
objects or mechanical hazards.
Extension cords should be selected so that there is
not an excessive length used. The longer an
extension cord, the greater the voltage drop over
the length of the cord and the performance of the
light can be reduced.
Recommended maximum extension cord lengths
for this light are:
- 1.0mm
2
25m
- 1.5mm
2
35m
•
•
•
•
•
•
ASSEMBLY
WARNING
Inserting/Removing the Battery
WARNING
To reduce the risk of injury, always
Inserting/Removing Power Cord
WARNING
reco
Only use
mmended
accessorie
for thi
s
s tool. Others
may be hazardous.
OPERATION
CAUTION
T
stare at the
o reduce the risk of injury
operating light source.
, do not
Press and hold the ON/OFF button to turn ON.
Use the MODE button to cycle through High, Medium,
Low. Press and hold the ON/OFF button to turn
OFF immediately. Rotate light head to desired angle.
MAINTENANCE
WARNING
unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the tool, battery pack or charger. Contact a
MILWAUKEE
®
service facility for ALL repairs.
Maintaining Tools
Cleaning
Repairs
For repairs, return the tool, battery pack and charger
to the nearest authorised service centre.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
Recharge battery only with the
charger specified for the battery.
For specific charging instructions, read the
operator’s manual supplied with your charger
and battery.
Insert
the battery pack by sliding battery pack into
the tool. Insert the battery pack until the battery
latches lock.
To operate on AC power, connect a suitable
extension cord to the AC inlet. To remove, unplug
the extension cord from the inlet.
Keep your tool in good repair by adopting a regular
maintenance program. Inspect your tool for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other
condition that may affect the tool operation. Return
the tool to a
MILWAUKEE
®
service facility for repair.
After six months to one year, depending on use,
return the tool to a
MILWAUKEE
®
service facility for
inspection.
To reduce the risk of personal
injury and damage, never
immerse your tool, battery pack or charger in
liquid or allow a liquid to flow inside them.
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain
cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include
gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never
use flammable or combustible solvents around
tools.
For a complete listing of accessories, go online to
milwaukeetool.com.au / milwaukeetool.co.nz or
contact a distributor.
