6
Operation
1. Remove ALL dirt and debris found in the tank.
2. Insert battery pack and attach accessories.
3. Press the Power switch to the desired speed.
Begin pick-up.
4. Turn off the vacuum immediately upon completing
a job or when tank is full and ready to be emptied.
NOTE:
If suction shuts off, turn off the vacuum
immediately and empty the tank.
5. Remove battery pack.
6. Clean the interior of the tank and accessories
periodically.
Storage
Before storing your vacuum, empty and clean the
pack.
MAINTENANCE
WARNING
To reduce the risk of
injury, always unplug
Maintaining Tool
WARNING
To reduce the risk of
personal injury and
damage, never immerse your tool, battery pack
them.
Cleaning
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and charger
to the nearest service centre.
ACCESSORIES
WARNING
Use only recommended
accessories. Others
may be hazardous.
the charger and remove the battery pack from
the charger or tool before performing any
maintenance. Never disassemble the tool,
battery pack or charger. Contact a
MILWAUKEE
®
service facility for ALL repairs.
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may affect the
tool operation. Return the tool, battery pack, and
charger to a
MILWAUKEE
®
service facility for
repair. After six months to one year, depending on
use, return the tool, battery pack and charger to a
MILWAUKEE
®
service facility for inspection.
If the tool does not start or operate at full power with
a fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a
MILWAUKEE
®
service facility for repairs.
For a complete listing of accessories, go online to
www.milwaukeetools.com.au/
www.milwaukeetools.co.nz or contact a distributor.
The detachable parts (include dust collector)
should be removed for cleaning.
Summary of Contents for M18 Fuel FBPV
Page 7: ......