background image

For a list of 

MILWAUKEE

® dealers, guarantee or service agents please contact 

MILWAUKEE

®

Customer Service or visit our website.

(Australia Toll Free Telephone Number 1300 361 505)

(New Zealand Toll Free Telephone Number 0800 279 624) 

or visit www.milwaukeetools.com.au / www.milwaukeetools.co.nz.

961011745-01

(A)

Milwaukee Electric Tool Corporation

13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005

Milwaukee Electric Tool Corporation (Australia)

Techtronic Industries (Australia) Pty. Ltd.

Rowville, Victoria, Australia, 3178

Milwaukee Electric Tool Corporation (New Zealand)

Techtronic Industries (New Zealand) Pty. Ltd.

Mangere, Auckland, New Zealand, 2022

Professionally made in China for Milwaukee Electric Tool Corporation

WARRANTY - AUSTRALIA and NEW ZEALAND

SERVICE - AUSTRALIA and NEW ZEALAND

MILWAUKEE

®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. 

Your satisfaction with our products is very important to us! If you encounter any problems with the

operation of this tool, please contact your authorised 

MILWAUKEE

® dealer.

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to 

product sold in Australia and New Zealand.

Summary of Contents for M18 CHD-0









Reviews: