MEMORY
UNITS
4
ASSEMBLY
WARNING
Recharge only with the charger
-
Temperature Protection
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
the battery pack
Always lock the trigger or remove
any time the tool
is not in use.
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
reco
Only use
mmended
accessorie
for thi
s
s tool. Others
may be hazardous.
Setting the Units (BAR, PSI or KPA)
use.
CAUTION
after
Allow
each
tool
10
to cool
minutes of
for 10 minutes
continuous
Overload Warning
FUNCTIONAL DESCRIPTION
3.
1. Memory button
2. Overload indicator
Units button
Warning Indicator
may come on. Check all con-
nections for blockages before continuing use.
Accessories/Hose Storage
on the back of the tool. The hose can be wrapped
around the storage area and secured in the hose
clamp.
OPERATION
WARNING
Do not leave the tool unattended during operation.
Risk of Bursting.
manufacturer's instructions for the item.
4
2
3
5
1
9
6
7
10
8
11
12
13
10.
9.
Digital pressure
gauge
11. - / + buttons
12. Handle
13. Hose
14. Shrader chuck
15. Sports needle
SPECIFICATIONS
Cat. No. ....................................................... M18 BI
Volts............................................................ 18V DC
Battery Type .................................................M18™
Charger Type................................................M18™
Maximum Pressure......150 PSI, 10.3 BAR, 1030KPa
Output ..................................... 1.41 SCFM @ 0 PSI
0.99 SCFM@ 45 PSI
Recommended Ambient
Operating Temperature .................... -17°C to 51°C
To reduce the risk of injury,
always wear proper eye
protection marked to comply with AS/NZS
1337.1.
When working in dusty situations, wear
appropriate respiratory protection or use a
suitable dust extraction solution.
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
17. Presta valve
17
16
4.
5.
Power button
Temperature protection
indicator
6. Target input value
7. Actual value
8. Units
Inflation button
16.
14
15
During extended use or constricted air flow, the tool
temperature may rise. If the Temperature Protection
Indicator comes on, allow the tool to cool for at
least 10 minutes before continuing. In extremely low
temperatures, the Temperature Protection
Indicator may come on if the battery is too cold.
To select the desired unit of pressure, press the
Units button to scroll through the units (BAR, PSI or
KPA).
Inflator nozzle
