![background image](http://html1.mh-extra.com/html/milwaukee/m12-dcag/m12-dcag_operators-manual_1799298004.webp)
4
4. Press and hold the Motor/On button for three seconds
and release. The tool will build pressure until it has
reached the desired PSI.
WARNING!
If the tool does
not shut down at desired pressure, or if pressure
builds into the red warning area, remove battery and
take tool into the nearest service centre.
5. Place tool into drain opening, sealing the drain with
the accessory. Use force to maintain seal.
WARN-
ING!
Do not place tool in water past the water line.
Damage to the tool may occur.
6. Press the trigger rapidly, holding for one second.
7. When done with tool, release any excess air by point-
ing the tool in a safe direction and pressing trigger
before storing.
8. After use, use hot, soapy water to wash hands and
other body parts exposed to drain contents.
MAINTENANCE
WARNING
To reduce the risk of injury, always
unplug the charger and remove the
battery pack from the charger or tool before per-
forming any maintenance. Never disassemble the
tool, battery pack or charger. Contact a
MILWAUKEE
®
service facility for ALL repairs.
Maintaining Tool
WARNING
To reduce the risk of personal injury
and damage, never immerse your
tool, battery pack or charger in liquid or allow a
Cleaning
Clean dust and debris from vents. Keep handles clean,
dry and free of oil or grease. Use only mild soap and a
damp cloth to clean, since certain cleaning agents and
solvents are harmful to plastics and other insulated
parts. Some of these include gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents contain-
solvents around tools. Do not pour water directly down
the discharge area.
Repairs
For repairs, return the tool, battery pack and charger to
the nearest service centre.
ACCESSORIES
WARNING
Use only recommended accessories.
Others may be hazardous.
ASSEMBLY
WARNING
Recharge only with the charger
-
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons and
pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To
insert
the battery, slide the pack into the body of the
tool. Make sure it latches securely into place.
WARNING
recommended for this tool. Others
may be hazardous.
Selecting the Proper Accessory
Name
Drain Style
Drain
Diameter
1-1/4" Drain Plug
2" Drain Plug
3" Drain Plug
Drain Shroud
Attachment
Floor drains, uneven
surfaces, permanent drain
covers
Toilet Seal Attachment P-Traps
Straight Connector
Extension
Quick connect
45º Offset Connector Angled
For a complete listing of accessories, go online to
or contact a distributor.
Accessory Installation
WARNING
Always remove battery pack before
changing or removing accessories.
for this tool. Others may be hazardous.
To reduce the risk of injury, wear a face shield.
Always wear leather gloves.
Select the proper accessory for your application.
1. To
install
the accessory, pull out the coupler. Press
the accessory bit into the coupler socket until the
coupler snaps back and the bit is locked into place.
2. To
remove
the accessory, pull out the coupler, then
pull out the accessory bit.
OPERATION
WARNING
Always remove battery pack before
changing or removing accessories.
for this tool. Others may be hazardous.
To reduce the risk of injury, wear a face shield.
Always wear leather gloves.
Inspect the drain to be cleaned before use. Do not
1. Select and install the proper accessory.
2. Insert battery pack.
3. Set the pressure gauge selector to the desired PSI
by twisting the pressure gauge cap.
NOTE:
the pressure low and work your way up.
1"-2"
(25mm-50mm)
2"-3"
(50mm-76mm)
3"-4"
(76mm-101mm)
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may affect the
tool operation. Return the tool, battery pack, and
charger to a
MILWAUKEE
®
service facility for
repair. After six months to one year, depending on
use, return the tool, battery pack and charger to a
MILWAUKEE
®
service facility for inspection. If the
tool does not start or operate at full power with a
fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a
MILWAUKEE
®
service facility for repairs.
For a complete listing of accessories refer to your
MILWAUKEE
®
Tool catalog or go online to
www.milwaukeetools.com.au /
www.milwaukeetools.co.nz. To obtain a catalog,
www.milwaukeetools.com.au /
www.milwaukeetools.co.nz.
contact your local distributor or a service centre.