Milwaukee HEAVY DUTY AS-30 MAC, Original Instructions Manual

Page: 26 / 28

26
LQVXODWLRQUHVLVWDQFHDQGFRQGLWLRQRIWKHÀH[LEOHFRUGVKRXOGEH
checked frequently.
In the event of any defect, the machine MUST be withdrawn from
service, completely checked and repaired by an authorized service
technician.
At least once a year, a MILWAUKEE
®
technician or an instructed
SHUVRQPXVWSHUIRUPDWHFKQLFDOLQVSHFWLRQLQFOXGLQJ¿OWHUVDLU
tightness and control mechanisms.
For user servicing, the machine shall be dismantled, cleaned and
serviced, as far as is reasonably practicable, without causing risk to the
PDLQWHQDQFHVWDႇDQGRWKHUV6XLWDEOHSUHFDXWLRQVLQFOXGH
GHFRQWDPLQDWLRQEHIRUHGLVPDQWOLQJSURYLVLRQIRUORFDO¿OWHUHGH[KDXVW
ventilation where the machine is dismantled, cleaning of the
maintenance area and suitable personal protection.
When carrying out service or repair operations, all contaminated items
which cannot be satisfactorily cleaned are to be disposed of; such
items shall be disposed of in impervious bags in accordance with any
current regulation for the disposal of such waste.
Maintenance
Remove the plug from the socket before performing maintenance.
Before using the machine make sure that the frequency and voltage
shown on the rating plate correspond with the mains voltage.
The machine is designed for continuous heavy work. Depending on
WKHQXPEHURIUXQQLQJKRXUV±WKHGXVW¿OWHUVKRXOGEHUHQHZHG.HHS
the machine clean with a dry cloth, and a small amount of spray polish.
During maintenance and cleaning, handle the machine in such a
PDQQHUWKDWWKHUHLVQRGDQJHUIRUPDLQWHQDQFHVWDႇRURWKHUSHUVRQV
In the maintenance area
•
8VH¿OWHUHGFRPSXOVRU\YHQWLODWLRQ
• Wear protective clothing
• Clean the maintenance area so that no harmful substances get into
the surroundings.
CAUTION !
Clean the water level limiting device regularly and examine it for signs
of damage.
Use only MILWAUKEE
®
accessories and MILWAUKEE
®
spare parts.
Should components need to be replaced which have not been
described, please contact one of our MILWAUKEE
®
service agents.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the machine.
Please read the instructions carefully before starting
the machine.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
Dust Class M
(IEC 60335-2-69).
The dusts which belong to this
class are: dusts with OEL
values
1)
> 0.1 mg/m³ as well
as saw dust.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.