Milwaukee 48-59-0181 Operator'S Manual Download Page 5

Page 5

Keep your battery pack and charger in good repair by adopting a regular
maintenance program. After six months to one year, depending on use,
return the battery pack and charger to a 

MILWAUKEE 

service facility for:

Electrical inspection

Testing to assure proper mechanical and electrical
operation

Maintaining Battery Pack

MILWAUKEE

 Nickel-Cadmium and Nickel-Metal Hydride battery packs will

operate for many years and/or hundreds of cycles when they are
maintained and used according to these instructions.
A battery pack that is stored for six months without being used will discharge
itself. Batteries discharge at a rate of about 1% per day. Charge the battery
every six months even if it is unused to maximize battery life. Do not tape
the tool's trigger in the ON position and leave the tool unattended as this may
discharge the battery to a point where it will no longer be able to recharge.
Use a 

MILWAUKEE

 battery pack only until it no longer performs with the

power and torque needed for your application.
Store your battery pack in a cool, dry place. Do not store it where the
temperature may exceed 120°F (50°C) such as in a vehicle or metal building
during the summer. High temperatures will overheat the battery pack,
reducing battery life. If it is stored for several months, the battery pack will
gradually lose its charge. One to three cycles of charging and discharging
through normal use will restore the capacity of the battery pack. During the
life of the battery pack, the operating time between charges becomes
shorter. If the operating time becomes extremely short after a proper charge,
the usable life of the battery pack has been reached and it should be
replaced.

MAINTENANCE

To reduce the risk of injury and damage, never immerse your

tool, battery pack or charger in liquid or allow a liquid to flow

inside them.

WARNING!

RBRC Battery Recycling Seals

The RBRC™ Battery Recycling Seals on your tool battery packs indicate that

MILWAUKEE

 has arranged for the recycling of that battery pack with the

Rechargeable Battery Recycling Corporation (RBRC). At the end of your
battery pack’s useful life, return the battery pack to a 

MILWAUKEE

 Branch

Office/Service Center or the participating retailer nearest you. For more
information, visit the RBRC web site at www.rbrc.org.

Disposing of Nickel-Cadmium Battery Packs

Nickel-Cadmium battery packs are recyclable. Under various state and local
laws, it may be illegal to dispose of this battery into the municipal waste
stream.  Return the battery pack to the nearest 

MILWAUKEE

 Branch Office/

Service Center or dispose of your battery pack according to federal, state
and local regulations.

Repairs

For repairs, return the tool, battery pack and charger to the nearest service
center.

Battery Pack Warranty

Battery packs for cordless tools are warranted for one year from the date
of purchase.

Cleaning

Clean dust and debris from charger and tool vents. Keep tool handles clean,
dry and free of oil or grease. Use only mild soap and a damp cloth to clean
the tool, battery pack and charger since certain cleaning agents and
solvents are harmful to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household detergents containing ammonia.
Never use flammable or combustible solvents around tools.

WARNING!

To reduce the risk of explosion, never burn a battery pack

even if it is damaged, dead or completely discharged.

To reduce the risk of injury, always unplug the charger and

remove the battery pack from the charger or tool before

performing any maintenance. Never disassemble the tool,
battery pack or charger. Contact a 

MILWAUKEE 

service facil-

ity for ALL repairs.

WARNING!

FIVE YEAR TOOL LIMITED WARRANTY

Every 

MILWAUKEE

 tool is tested before leaving the factory and is

warranted to be free from defects in material and workmanship.

MILWAUKEE

 will repair or replace (at 

MILWAUKEE

’s discretion), without

charge, any tool (including battery chargers) which examination proves to
be defective in material or workmanship from five (5) years after the date
of purchase. Return the tool and a copy of the purchase receipt or other
proof of purchase to a 

MILWAUKEE

 Factory Service/Sales Support Branch

location or 

MILWAUKEE

 Authorized Service Station, freight prepaid and

insured. This warranty does not cover damage from repairs made or
attempted by other than 

MILWAUKEE

 authorized personnel, abuse, normal

wear and tear, lack of maintenance, or accidents.
Battery Packs, Flashlights, and Radios are warranted for one (1) year from
the date of purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL 

MILWAUKEE

 BE LIABLE FOR ANY

INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS
OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR
MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other rights
that vary from state to state and province to province. In those states that
do not allow the exclusion of implied warranties or limitation of incidental or
consequential damages, the above limitations or exclusions may not apply
to you. This warranty applies to the United States, Canada, and Mexico only.

Summary of Contents for 48-59-0181













Reviews: