Milnor MWF18J8, Installation Manual, Page: 11 / 35

Pellerin Milnor Corporation
9
WARNING:
Explosion Hazards —
Clutch and speed switch (multiple motor ma-
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
�
Stop the machine immediately if any of these conditions occur: • ab-
normal whining sound during extract • skidding sound as extract ends •
clutches remain engaged or re-engage during extract
Careless Use Hazards
BNWSUS04.C05 0000234998 B.2 A.2 A.3 12/10/20 4:36 PM Released
Careless Operation Hazards—Vital Information for Operator Personnel (see also
operator hazards throughout manual)
BNWSUS04.C06 0000234997 B.2 A.2 A.4 12/10/20 4:36 PM Released
WARNING:
Multiple Hazards — Careless operator actions can kill or injure person-
nel, damage or destroy the machine, damage property, and/or void the
warranty.
�
Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
�
Do not operate a damaged or malfunctioning machine. Request authorized service.
�
Do not attempt unauthorized servicing, repairs, or modification.
�
Do not use the machine in any manner contrary to the factory instructions.
�
Use the machine only for its customary and intended purpose.
�
Understand the consequences of operating manually.
Careless Servicing Hazards—Vital Information for Service Personnel (see also
service hazards throughout manuals)
BNWSUS04.C07 0000234996 B.2 A.2 A.4 12/10/20 4:36 PM Released
WARNING:
Electrocution and Electrical Burn Hazards —
Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
�
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
�
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING:
Entangle and Crush Hazards —
Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
�
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
�
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
General Information