Milnor MWF100C7, Installation And Service, Page: 32 / 116

Pellerin Milnor Corporation
2. Facility Prerequisites
BNWUUI03.R01 0000254786 B.4 B.7 1/2/20 2:19 PM Released
Required Condition Supporting Information
structural support See document BNUUUI01 “Vital Information About the Forces
Imparted to Supporting Structures by Laundering Machines”
which can be found in the installation manual and also at
https://milnor.sharefile.com/d-s8408ba617d244d98 .
protected storage If the machine must be stored temporarily, it must be protected
from dampness and excessive temperatures.
access to the final location See the machine dimensional drawing, which can be found at the
end of the installation manual, for overall dimensions. Partial dis-
assembly is sometimes possible. Contact the Milnor
® Service
department.
clearances for machine
movement and maintenance See the dimensional drawing.
operational clearances Adequate clearance around controls and for movement of laundry
equipment such as carts. See the dimensional drawing.
available utilities See the dimensional drawing and the external fuse and wire
document.
available drain(s) See the dimensional drawing. The drain valve(s) must have unre-
stricted access to a drain trough of sufficient capacity in the
foundation.
laundry room ventilation The machine will contribute heat and vapors to the laundry room,
which must provide adequate ventilation.
3. Rigger Precautions
BNWUUI03.R02 0000254785 B.6 B.7 1/2/20 2:19 PM Released
CAUTION: Incorrect rigging — can cause mishaps and costly machine damage.
�
Know and accommodate the machine shipping weight.
�
Use only lifting eyes for crane lifting.
�
Use long cables or a spreader bar for crane lifting.
�
Leave the machine skidded as long as possible.
�
Protect fragile or sensitive machine components.
�
Prepare the foundation and install anchor bolts correctly.
�
Set the machine at the correct height and level.
�
Apply machinery grout evenly so that support is distributed.
�
Tighten anchors alternately so that the hold-down force is distributed.
Handling a Washer-extractor from Delivery to Final Location
28