Milnor MP1540 Series, Manual

Page: 19 / 107

PELLERIN MILNOR CORPORATION
Table 3: Discharge Interface Numeric Output Signals and Digit Order—Single Stage Press
Common
Conn.*
Most
Significant
Dedicated Connections (Binary Data Signals)
Least
Significant
Signal name on schematic
(e.g., Drycode A, B, etc.)--> K J H G F E D C B A
Multi-terminal n/a WCZ WCZ WCZ WCZ
Pin Number n/a 15 • 16 13 • 14 11 • 12 9 • 10
Wire Number n/a
268 •
269
266 •
267
264 •
265
261 •
262
Display/code -- o2/T o2/S o2/R o2/Q
16 Drycodes
(00 - 15)
Board/code -- io2/7 io2/6 io2/5 io2/4
Multi-terminal n/a WCZ WCZ WCZ WCZ
Pin Number n/a 7 • 8 5 • 6 3 • 4 1 • 2
Wire Number n/a
252 •
260
254 •
253
256 •
255
259 •
258
Display/code -- o2/P o2/O o2/N o2/M
16 Destina-
tion Codes
(00-15)
Board/code -- io2/3 io2/2 io2/1 io2/0
Multi-terminal n/a WCY WCY WCY WCY WCY WCY WCY WCY
Pin Number n/a 1 • 9** 1 • 8** 1 • 7** 1 • 6** 1 • 5** 1 • 4** 1 • 3** 1 • 2**
Wire Number n/a
134 •
321
134 •
320
134 •
319
134 •
318
134 •
317
134 •
316
134 •
315
134 •
314
Display/code -- o2/L o2/K o2/J o2/I o2/H o2/G o2/F o2/E
256
Customer
Codes (000-
255)
Board/code -- o1/23 o1/22 o1/21 o1/20 o1/19 o1/18 o1/17 o1/16
Multi-terminal n/a WCX WCX WCX WCX WCX WCX WCX WCX
Pin Number n/a 15 • 16 13 • 14 11 • 12 9 • 10 7 • 8 5 • 6 3 • 4 1 • 2
Wire Number n/a
368 •
369
366 •
367
364 •
365
361 •
362
352 •
360
354 •
353
356 •
355
359 •
358
Display/code -- Not available
256 Goods
Codes (000-
255)
Board/code -- io3/7 io3/6 io3/5 io3/4 io3/3 io3/2 io3/1 io3/0
* For outputs from Milnor, Milnor does not normally assign either pin of the potential-free contact as the common. Hence, both pins
have unique pin and wire numbers. In this table these are listed together in the same cell, with a dot between (e.g., C • D)
**To provide eight customer code signals with limited available terminals, Customer codes A through H had to share pin 1.
Table 4: Discharge Interface non-Numeric Signals and Enabling Order—Single Stage Press
Common Connection* Dedicated Connection
Signal
Direc-
tion
Multi-
terminal
Pin Wire
Multi-
terminal
Pin Wire
Display
/ code
Board /
code
Function Name / Signal Name
Milnor will set all batch data (previous table) before it enables the "discharge desired / desires to unload" signal.
Output* WCY 19 313* WCY 18 133 o1/k o1/2 discharge desired / desires to unload
Input WCY 23 7 WCY 11 412 i1/j io1/9 load allowed / start discharge
* For outputs from Milnor, Milnor does not normally assign either pin of the potential-free contact as the common. Hence, both pins
have unique pin and wire numbers.
4.
Monitoring Allied Interface Outputs and Inputs
The status of outputs and inputs can be monitored on the machine display while the machine is in
operation, as explained in the machine reference manual (see Note 1 and Note 2). Beginning with
Mark 4 controls (Mark 9 on the CBW), output and input status can also be monitored on the I/O
boards. These boards contain LED's—one green LED for each input and one red LED for each
output (see Note 3). When the LED is illuminated, the circuit is made.
15