Milnor MilTouch MWB26Z, Operator'S Manual

Page: 9 / 38

Pellerin Milnor Corporation
7
BNCLJO10 / 2021172
BNCLJO10 0000212821 D.4 4/19/21 11:46 AM Released
2.3 How to Use the MilTouch™ Controller
BNCLJO10.C01 0000212820 E.3 D.4 C.3 9/11/20 8:32 AM Released
The Milnor ® MilTouch™ washer-extractor controller uses a touch-sensitive display screen to op-
erate the machine. All the functions and information you need to process goods appear on this
screen.
CAUTION:
Excessive pressure — can damage the display screen.
�
Do not push hard on the glass.
�
Use only a finger to touch the glass. Do not touch the screen with a
tool.
Turn the master switch on ( ) to apply power to the control system. The Home display appears
on the touchscreen.
2.3.1 The Home Display
BNCLJO09.C01 0000211248 E.3 D.4 D.2 12/9/20 4:22 PM Released
The display pictured in the following figure, subsequently referred to as the Home display, is
used to access all the other displays. Buttons labelled with an asterisk (*) are not used during rou-
tine operation. For additional information on those buttons and the displays they access, see the
separate controller reference manual.
From the Home display, and with a load of goods in the machine, you can select and run wash
formulas.
Controls