
Chapter 3. Routine Maintenance
PELLERIN MILNOR CORPORATION
• Machines that use a spring to hold tension on the motor base—Use the belt tension sleeve
supplied with the machine. Put the sleeve on the rod that the spring is attached to or remove
the sleeve to increase or decrease tension. Replace the spring if necessary.
Figure 7: Electric Box and Inverter. These are examples. Your machine can look different.
30022X_ Washer-extractor
48040F_ Washer-extractor
76039 CBW Tunnel Washer
Legend
1.
Air filter
2.
Fan on elecrtric box door. Tip: Put streamers in front of the fan to make sure the fan operates.
3.
Inverter cooling vanes and vents. See
4.
Braking resistor, if applicable
.
CAUTION 22 : Risk of damage
—The inverter will burn out without sufficient airflow.
• Keep fans, filter, vents, and braking resistors clean.
31
Summary of Contents for 48040H7R
