Milnor 30015V8Z, Installation Manual

Page: 14 / 59

12
Pellerin Milnor Corporation
B2T2001014: Cold water connection.
B2T2001016: Flushing water connection. This is the water that
goes into the supply compartment or pumped chemical manifold
to flush chemicals into the machine.
B2T2003001: Hold the side of the connection stationary with a
wrench as you tighten the connection with another wrench. Other-
wise, you may twist components, such as valves, damaging them.
BNWOAI03 / 2018194
BNWOAI03 0000184959 B.3 1/2/20 2:19 PM Released
Installation Tag Guidelines
BNWOAI03.R01 0000184958 D.2 B.3 A.4 1/2/20 2:19 PM Released
30015V8Z 30015VRJ 30015VZZ
30022V8Z 30022VRJ 30022VZZ
NOTICE:
This information may apply to models in addition to those listed above. It
applies to paper tags. It does not apply to the vinyl or metal safety placards, which must
remain permanently affixed to the machine and replaced if no longer readable.
Paper tags on the machine provide installation guidelines and precautions. The tags can be tie-on
or adhesive. You can remove tie-on tags and white, adhesive tags after installation. Yellow adhe-
sive tags must remain on the machine.
The following entries explain the installation tags. Each entry includes: 1) the tag illustration, 2)
the tag part number at the bottom of the tag, and 3) the meaning of the tag.
Display or Action Explanation
Read the manuals before proceeding. This symbol appears on
most tags. The machine ships with safety, operator, and routine
maintenance guides for customer use. Milnor dealer manuals for
installing, commissioning, and servicing the machine are also
available from the Milnor Parts department.
B2TAG88005: This carefully built product was tested and in-
spected to meet Milnor performance and quality standards by
(identification mark of tester).
General Information