SOLIDS APPLICATIONS - TYPICAL
bin wall seams
filling profile
emptying profile
1. Transducer angled to avoid seams
in bin wall and aimed at discharge in
order to read bin when empty.
2. Avoid intersecting bin wall seams,
structural members and wall
irregularities. Otherwise, refer to
transceiver manual.
3. Transducer too close to
material inlet. Falling
material will intersect
sound beam and cause
erroneous readings or
loss of echo.
minimal angle of
repose
transducer
discharge
4. On fluid-like solids, aim
transducer perpendicular
to material surface.
5. On dual discharge bins,
aim each transducer at
the discharge point.
PL-419
7
