Chemical Resistance
Do not use the reservoir with alcohols, strong acids or bases (pH < 2 or > 10), oxidizing agents,
or organic solvents (esters, ketones, aromatic and chlorinated hydrocarbons).
Specifications
Maximum operating pressure
Amicon® Stirred Cell Reservoir
Amicon® Stirred Cell
Amicon® Stirred Cell Selector Valve
Diafiltration using the Amicon® Stirred
Cell, Selector Valve, and Reservoir
5.2 bar (75 psi)
5.2 bar (75 psi)
5.2 bar (75 psi)
3.8 bar (55 psi)
Working temperature range
4–40 °C (39–104 °F)
Capacity
800 mL
Holdup volume
4 mL
Dimensions
width/diameter
length
height
Reservoir without stand
12.1 cm (4.75 in.)
N/A
19.1 cm (7.5 in.)
Retaining stand
12.7 cm (5 in.) 12.1 cm (4.75 in.) 17.8 cm (7 in.)
Tubing
¼ in. (6.4 mm) OD × 2.4 m (8 ft)
Weight (without tubing)
1.7 kg (3.7 lb)
Liquid and gas port connections
¼ in. (6.4 mm) OD × ¹⁄₈ in. (3.2 mm) NPT
tube fittings
Materials of construction
Reservoir body
Cap and base
Retaining stand
Reservoir O-rings (red)
Relief valve O-ring
Tube fittings
Tubing
Acrylic
Acetal
Glass-filled nylon
Silicone
Buna-N
Nylon, stainless steel, buna-N
Polyethylene
Statement Regarding Compliance with the Pressure Equipment
Directive 97/23/EC
EMD Millipore Corporation certifies that this product complies with the European Pressure
Equipment Directive, 97/23/EC of 29 May 1997. This product is classified under Article 3 § 3
of the Pressure Equipment Directive. It has been designed and manufactured in accordance
with sound engineering practices to ensure safe use. The product is accompanied by user
instructions and bears markings to permit identification of EMD Millipore Corporation as the
manufacturer or authorized representative of this product within the European Community. In
compliance with Article 3 § 3 of the Pressure Equipment Directive, this product does not bear
the CE mark.
Ordering Information
This section lists catalogue numbers for the Amicon® Stirred Cell Reservoir and related
products. See Technical Assistance section for contact information. You can purchase these
products on-line at www.millipore.com/products.
Description
Cat. No.
Qty
Amicon® Stirred Cell Reservoir, 800 mL
Includes reservoir, tube fittings, tubing.
6028
1
Amicon® Stirred Cell, 50 mL
UFSC05001
1
Amicon® Stirred Cell, 200 mL
UFSC20001
1
Amicon® Stirred Cell, 400 mL
USCF40001
1
Amicon® Stirred Cell Selector Valve
For instant switching from concentration to diafiltration. Includes
selector valve, tube fittings, tubing.
6003
1
Amicon® Stirred Cell Manifold
For operation of multiple cells or reservoirs; individually valved.
Includes manifold, tube fittings, tubing, mounting hardware.
6015
1
Notice
The information in this document is subject to change without notice and should not be
construed as a commitment by EMD Millipore Corporation (“Millipore”) or an affiliate. Neither
EMD Millipore Corporation nor any of its affiliates assumes responsibility for any errors that
may appear in this document.
Technical Assistance
For more information, contact the office nearest you. In the U.S., call 1-800-221-1975.
Outside the U.S., go to our web site at www.millipore.com/offices for up-to-date worldwide
contact information. You can also visit the tech service page on our web site at
www.millipore.com/techservice.
Standard Warranty
The applicable warranty for the products listed in this publication may be found at
www.millipore.com/terms (“Conditions of Sale”).
© 2015 EMD Millipore Corporation, Billerica, MA, U.S.A. All rights reserved.
The M logo, Millipore, and Amicon are registered trademarks of Merck KGaA, Darmstadt, Germany.
99137, Rev. 10/15
User Guide
Amicon
®
Stirred Cell Reservoir
Cat. No. 6028
Introduction
The 800 mL Amicon® Stirred Cell Reservoir increases the volume capacity of Amicon® Stirred
Cells. When pressurized by an external gas source, the reservoir automatically replenishes
liquid in the stirred cell due to the pressure differential between the two vessels. The
reservoir can also be used for continuous diafiltration to exchange sample buffer. In order
to maintain an appropriate volume of fluid in the Amicon® Stirred Cell, the Amicon® Stirred
Cell Selector Valve, cat. no. 6003, (or similar user-supplied valve(s) to control gas and liquid
output independently) should be installed between the reservoir and stirred cell.
Components Supplied
PR
Y HERE
100
200
300
400
500
600
700
800
Amicon® Stirred
Cell Reservoir with
retaining stand.
O-rings
Tubing
(¼ in. outer diameter)
Pressure
relief valve
Spare inlet/
outlet fitting
Cap removal
tool
99137_Rev1015.indd 1
10/26/2015 4:06:14 PM