Million Dollar Baby Ashbury 4 in 1 Assembly And Operation Manual Download Page 9

revised21APR2011

WARNING:

Failure to follow these warnings and 

the assembly instructions could result 

in serious injury or death.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING 

CRIB. KEEP THE MANUAL FOR FUTURE USE.

WARNING:

Infants can suffocate on soft bedding. Never add a pillow or comforter. Never 

place additional padding under an infant.

• 

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed 

• 

on their backs to sleep, unless otherwise advised by your physician.

Strings can cause strangulation! Do not place items with a string around a 

• 

child’s neck, such as hood strings or 

pacifier

 cords. Do not place cords, straps, 

or similar items that could become wound around the child’s neck in or near this 

crib. Do not suspend strings over a crib or attach strings to toys.

To help prevent strangulation tighten all fasteners. A child can trap parts of the 

• 

body or clothing on loose fasteners.

DO NOT place a crib near a window where cords from blinds or drapes may 

• 

strangle a child. Do not place this crib near a window or a patio door where a 

child could reach the cord of a blind or curtain and be strangled.

When a child is able to pull to a standing position, set the mattress to the lowest 

• 

position and remove bumper pads, large toys and other objects that could serve 

as steps for climbing out.

• 

• 

Check this product for damaged hardware, loose joints, loose bolts or other

fasteners, missing parts or sharp edges before and after assembly and frequently 

during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if 

any parts are missing, damaged or broken. DO NOT substitute parts. Contact  

MDB FAMILY  

for replacement parts and instructional literature if needed. 

DO NOT use a water mattress with this crib.

• 

Parents should ensure a safe environment for the 

child by checking regularly, before placing the 

child in the product, that every component is 

properly and securely in place.

 

For cribs equipped with teething rails, replace teething rail if damaged, cracked 

• 

If 

refinishing,

 use a non-toxic 

finish

 

specified

 for children’s products.

• 

Never use plastic shipping bags or other plastic 

films

 

as mattress covers

 

• 

  because they can cause suffocation.

Infants can suffocate in gaps between crib sides when used with a mattress 

• 

  that is too small.

 

 

or loose. 

• Follow warnings on all products in a crib.

Please do NOT remove any wood screws 

in the normal disassembly of the crib. 

WARNING:

 

ONE YEAR LIMITED WARRANTY:

We will replace any missing parts at the time 

of purchase or any defective item within a one 

year period from the date of original purchase. 

Please keep your receipt so that we may 

process your warranty request. This warranty 

only covers new units with original packaging 

and ownership, and is not transferable. It does 

not cover any used, secondhand or demo 

models. 

This warranty does not cover any damaged or 

defective parts that result from installation and 

assembly, normal wear and tear, abuse, negli-

gence, improper use or alteration to the finish, 

design, and hardware of the crib. 

The specific 

legal rights of this warranty may vary from 

state to state. Some states do not allow any 

exclusion or limitation of incidental damages. 

Some states do not allow limitation on how 

long an implied warranty lasts.     

 

Do not use this crib if the child is able to climb out unaided or is taller than 

35 in. (89cm).

• 

Do not use this crib if you cannot exactly follow the accompanying instructions.

Registering your product is even easier than

before. You can register your product on our 

website at: www.themdbfamily.com

IF YOU WOULD LIKE TO ORDER 

REPLACEMENT OR MISSING PARTS 

PLEASE VISIT US AT:

WWW.THEMDBFAMILY.COM

OR YOU CAN CONTACT US BY MAIL:

MDB FAMILY

855 WASHINGTON BLVD.

MONTEBELLO, CA 90640

Storage:

• Ensure that the sides are properly latched or locked in place when the crib is 

occupied.

• The mattress used with this crib should not be more than 15cm thick and 

should be of such length with width that the gap between the mattress and the 

sides of the crib is no more than 3cm when the mattress is pushed into the 

corner of the crib.

   Pine woods exchange moisture with the air adjust-

ing to major changes in room temperature and 

humidity. Therefore, it is best to place your furniture 

away from heating or air-conditioning vents. 

   Sunlight is not friendly to solid wood furniture and 

prolonged direct exposure to harsh sunlight can 

discolor the finish. Be careful not to place your furni-

ture in direct sunlight for extended periods of time. As 

with all your fine furniture, blot up spills immediately.

 

Care and Cleaning:

   Do not scratch or chip the finish. Do not use abra

-

sive chemicals for cleaning. Clean with mild soap on 

a soft rag. Rinse and dry thoroughly.  If you ever 

refinish this furniture, be sure to use only a non-toxic 

finish specified for children’s products. If you choose 

to refinish this furniture, the warranty will be voided.

Summary of Contents for Ashbury 4 in 1












Reviews: