Introduction
1
Congratulations!
Thank you for buying a Milli-Q water purification system.
Milli-Q
®
IQ 7003/7005/7010/7015 produces ultrapure water from a tap water source. Installation
of this product should be performed by a qualified service representative with access to qualified
installation documentation.
This user manual is a guide for use during the normal operation and maintenance of a Milli-Q
IQ 7003/7005/7010/7015 water purification system. It is highly recommended to fully read this
manual and comprehend its contents before handling the water purification system.
System identification
System
Catalogue number
Voltage
Frequency
Milli-Q
®
IQ 7003
ZIQ7003T0
100-240 V
50-60 Hz
Milli-Q
®
IQ 7005
ZIQ7005T0
100-240 V
50-60 Hz
Milli-Q
®
IQ 7010
ZIQ7010T0
100-240 V
50-60 Hz
Milli-Q
®
IQ 7015
ZIQ7015T0
100-240 V
50-60 Hz
Manufacturing site:
Millipore SAS, 67120 Molsheim, France
For more information on your Milli-Q system, please call your local representative or visit our
www.emdmillipore.com (North America) or www.merckmillipore.com (Rest of the World).
Intended use
The Milli-Q IQ 7003/7005/7010/7015 is intended to produce pure (type 2) and ultrapure
(type 1) water from a tap water source primarily for use in research and quality control in a
variety of laboratories worldwide.
The product is designed to produce ultrapure water with specific characteristics (refer to the
requirements and specifications section) when it leaves the water purification system, provided that
it is fed with water quality within specifications and properly maintained as required by the supplier.
Merck KGaA does not warrant the product for any specific application. It is up to the user to
determine if the quality of the water produced by the product matches their expectations, fits
with norms/legal requirements and to bear responsibility resulting from the usage of the water.
The product is not intended to produce: water for injection, water for dialysis, sterile water for
irrigation or injection, bacteriostatic water for injection, sterile purified water in containers, and
sterile water for injection in container or ingestion. The product is not intended to be used in
explosive environments according to ATEX Directive – equipment & protective systems intended
for use in potentially explosive atmospheres. In addition the product is not intended as a Medical
Device, including In-Vitro Devices.
INTRODUCTION