Miller T94 Series, Manual

Page: 9 / 32

OM-255503 Page 7
SECTION 3 − SPECIFICATIONS
Specification
T94
T94i
Viewing Field 3.81 x 2.62 in
(97 x 60mm)
Reaction Time 0.0000500 sec (1/20,000)
Available Shades
All Shades Provide
Continuous
UV And IR
Protection.
Weld Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Cut Mode
Darkened State: No. 5 − No. 8
Light State: No. 3
Grind Mode
Light State: No. 3
X-Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Sensitivity Control Adjustable For Varying Ambient Light And Welding Arc
Delay Control Slows Lens Dark-To-Light State Between 0.1 And 1.0 Seconds
Automatic Power Off Shuts Lens Off 45 Minutes After Last Arc Is Struck
Low Battery Light Red LED Illuminates To Indicate 2 − 3 Days Remaining Battery Life
Power Supply Panasonic CR2450 Lithium Battery
(Miller Part No. 217043)
Sensors Independent/Redundant (Four)
Operating
Temperature
14 F to 131 F / − 10 C to +55 C
When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
Storage
Temperature
− 4 F to 158 F / − 20 C to +70 C
When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
Total Weight T94: 21 oz (595 g)
T94i: 25.7 oz (729 g)
Standards Meets ANSI Z87.1+, CSA Z94.3
Warranty Three Years From Date Of Purchase (Section 12)