OWNER’S MANUAL
OM-237 679A
2008
−
02
RFCS - RJ45 Foot Control
1.
Safety
READ SAFETY BLOCKS in welding power
source Owner’s Manual before proceeding.
2.
Typical Connections
805 166-A
1
Welding Power Source Foot
Control Receptacle
2
Strain Relief (Optional
Installation)
3
Cord
4
Foot Control
If desired, route cord through strain
relief. Remove screw as shown
from welding power source, and
use screw to secure strain relief.
Plug one end of cord into receptacle
on welding power source. Plug
remaining end into receptacle on
back of foot control.
Tools Needed:
1
3
2
4
Torx T25
