Miller OM-280995C, Manual

Page: 11 / 20

OM-280995 Page 9
SECTION 4 − REPLACING CONSUMABLE LENSES AND
INSERTING MAGNIFYING LENS FRAME
4-1. Replacing The Lens Cover
!
Never use the auto-darken-
ing lens without the lens
cover properly installed.
Welding spatter will dam-
age the auto-darkening
lens and void the warranty.
1 Shield
2 Weld-Mask
3 Lens
4 Release Tab
Separate shield from weld-mask.
Pull the lens out of the frame using
the release tab on the cover lens.
Remove protective film on both
sides of new lens. Install new cov-
er lens.
Be sure both tabs on lens
cover are securely fastened
in frame slots.
Be sure the cover lens is
seated properly (flat) to pre-
vent fogging.
1
2
3
4
Front
Back
Remove protective film on
both sides of new lens.