manualshive.com logo in svg

Miller Big Blue 300 D, Owner'S Manual, Page: 49 / 76

Share
Download
Miller Big Blue 300 D Owner'S Manual Download Page 49

OM-236 949 Page 45

Trouble

Remedy

Engine slowly stopped and cannot be

restarted.

Check fuel level.

Check engine air and fuel filters (see Sections 8-3 and 8-6).

See engine manual.

Battery discharges between uses.

Turn Engine Control switch off when unit is not running.

Clean top of battery with baking soda and water solution; rinse with clear water.

Recharge or replace battery if necessary.

Periodically recharge battery (approximately every 3 months).

Engine idles, but does not come up to

weld speed (units with idle option only).

Have Factory Authorized Service Agent check fuel/hour gauge and current transformer CT1.

Engine does not run at idle speed

(units with idle option only).

Have Factory Authorized Service Agent check fuel/hour gauge, and control relay CR4.

Engine uses oil during run-in period;

wetstacking occurs.

Dry engine according to run-in procedure (see Section 10).

Notes

Summary of Contents for Big Blue 300 D













































































Reviews:

No comments