OM-244 997 Page 16
G. Installing Dust Tray Rails To Optional Tool Chest (Use With An X-pattern Top)
.
For X-pattern top, use rails that
came with the dust tray and
hardware that came with the
tool chest. Brackets included
with tool chest are not needed
with dust tray.
1
Dust Tray Rails
Use four bolts CC and install dust
tray rails to top of tool chest. Be sure
that rails are pushed in as close to-
gether as possible.
Do not tighten bolts at this time.
Do not install dust tray at this time.
CC
Tools Needed:
1
hex bit 3/16 in.
H. Installing Brackets To Optional Tool Chest (Use With A Solid Top)
.
For solid top, use brackets and
hardware that came with the
tool chest.
1
Brackets
Use four bolts CC and install
brackets to top of tool chest. Be
sure that brackets are pushed in as
close together as possible.
Do not tighten bolts at this time.
CC
Tools Needed:
1
hex bit 3/16 in.
