Miller AA40G, Owner'S Manual

Page: 26 / 28

OM-200580 Page 22
Table 8-1. Drive Roll And Wire Guide Kits
”V”
GROOVE FOR
HARD WIRE
”U” GROOVE FOR SOFT
*
SHELLED
CORED WIRES
”V” KNURLED FOR HARD
*
SHELLED
CORED WIRES
”U” COGGED FOR EXTREMELY SOFT WIRE OR SOFT
*
SHELLED CORED WIRES
”U” GROOVE FOR ALUMINUM WIRES CONTAINS NYLON WIRE GUIDES
WIRE SIZE .023/.025 in. (0.6 mm)
151024
.030 in. (0.8 mm)
151025
.035 in. (0.9 mm)
151026
151052
243233
.040 in. (1.0 mm)
161190
.045 in. (1.1/1.2 mm)
151027
151037*
151053
151070
243234*
.052 in. (1.3/1.4 mm)
151028
151038
151054
151071
1/16 in. (1.6 mm)
151029
151039
151055
151072
243235
.068/.072 in. (1.8 mm)
151056
5/64 in. (2.0 mm)
151040
151057
151073
3/32 in. (2.4 mm)
151041
151058
151074
7/64 in. (2.8 mm)
151042
151059
151075
1/8 in. (3.2 mm)
151043**
151060**
151076**
*Accommodates .045 and .047 (3/64 in) wire **Requires a low
*
speed wire feeder
Wire Guides
Nylon Wire Guides for Feeding Aluminum Wire
Wire Sizes
Inlet Guide
Intermediate Guide
Wire Size
Inlet Guide
Intermediate Guide
.023 to .040 in. (0.6 to 1.0mm)
221030
149518
.035 in. (0.9mm)
221912
242417
.045 to .052 in. (1.1 to 1.4mm)
221030
149519
.047 in. (1.2mm)
221912
205936
1/16 to 5/64 in. (1.6 to 2mm)
221030
149520
1/16 in. (1.6mm)
221912
205937
3/32 to 7/64 in. (2.4 to 2.8mm)
229919
149521
1/8 in. (3.2mm)
229919
149522