OM-222166 Page 61
10-10.
Blowing Out Inside Of Unit
!
Turn Off welding power
source and disconnect input
power.
!
Remove wrapper and be
sure input capacitors are
discharged.
Blow out inside of unit. Blow out fan
motors in right side panel and front
panel.
804 625-B
Notes
16 Gauge (.063 in.)
22 Gauge (.031 in.)
24 Gauge (.025 in.)
20 Gauge (.037 in.)
18 Gauge (.050 in.)
14 Gauge (.078 in.)
1/8 in. (.125 in.)
3/16 in. (.188 in.)
1/4 in. (.25 in.)
5/16 in. (.313 in.)
3/8 in. (.375 in.)
1/2 in. (.5 in.)
MATERIAL THICKNESS REFERENCE CHART