11
The Compass
x
Fluid Head can be stored for extended periods;
Miller recommends storage in a Miller case and the following:
• Clean the external surfaces.
• Keep in a dry place away from direct sunlight.
• Loosen off PAN & TILT LOCK.
Spare Parts and Accessories
Storage
Service, Sales and Support
Miller Authorised Service Agents must carry out all service
and repair work. Failure to observe this requirement may void
warranty.
It is advisable to notify Miller or a Miller Authorised Service Agent
if a change of performance is observed as a result of dropping
or rough usage. For information regarding sales and service of
Miller products or for your nearest Miller representative please
contact us via our website or at the following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade
Artarmon, Sydney, NSW 2064 Australia
P +61 2 9439 6377
F +61 2 9438 2819
[email protected]
MILLER Camera Support (LLC) USA
216 Little Falls Road (Unit 15 & 16),
Cedar Grove, New Jersey 07009 USA
P +1 (973) 857 8300
F +1 (973) 857 8188
[email protected]
MILLER FLUID HEADS (EUROPE) LTD.
12A, Shepperton Business Park
Govett Avenue, Shepperton
Middlesex, TW17 8BA
United Kingdom
P +44 (0) 1932 222 888
F +44 (0) 1932 222 211
[email protected]
millertripods.com
ITEM
ITEM NO.
Battery
P3798
Camera screw 3/8”
P0037
Camera screw 1/4”
P0036
Serrated washer
PN12501
Pan handle - fixed with clamp
679
Pan handle - telescopic with clamp
696
Accessory mounting adaptor 1/4” and 3/8”
1217
Accessory mounting bracket
1218
Sliding Plate Assembly (Euro)*
1210X
Sliding Plate Assembly (Mini Euro)*
1206X
1/4” screw and pin carriage
493
*1206 & 1210 are not compatible with CompassX,
use 1206X & 1210X only.
Warranty
Please refer to warranty card for complete details.
