Miller Weldmaster Triad Extreme, Manual

Page: 19 / 50

Instruction Manual
Page 19
10.0 Wedge Installation (Continued)
CHAPTER 10 WEDGE INSTALLATION
Using clip & screw, attach
around heater wires and posi-
tion to body of Triad. Do not
fully tighten.
Electrically connect hot wedge
to receptacle on body of Triad.
When connected, make com-
fortable bend of heater wire and
position properly in clip. Swing
wedge in and out of welding po-
sition to make sure wrap around
back of Triad is comfortable.
When completed, tighten clip to
secure.