Optima
™
#043 389
A multipurpose,
microprocessor-based
pulse con trol for both
synergic MIG (wire
welding or GMAW) or
manual MIG pulsing.
Use this control with the
XMT 304/350 CC/CV
power sources and any Miller wire feeder,
including automatic feeders and spool
guns. Includes a 25 ft (7.6 m) cord with
14-pin plug. (Not for use with XMT 350
MPa or VS models.)
Extension Cords for Optima
#043 725
25 ft (7.6 m)
#043 726
50 ft (15.2 m)
#043 727
75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin recep tacles. For
use with Spoolmatic
30A spool gun.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
HF-251D-1
High-Frequency Arc
Starter and Stabilizer
#042 388
Portable 250 amp, 60%
duty cycle unit adds
high frequency to the
welding circuit to help start the arc when
using the DC TIG (GTAW) process.
Operates on 115 VAC, 50/50 Hz. See Lit.
Index No. AY/5.1.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity revers ing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp recepta cle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
Gas Solenoid Kit #195 286
Easy to install, optional gas solenoid kit for
TIG welding applications. Kit only works
with XMT 350.
RFCS-14 Foot Control
#043 554
Heavy-duty foot current
and contactor control.
Includes 20 ft (6 m)
cord and 14-pin plug.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RMLS-14
#129 337
14-pin plug
Momentary- and maintained-contact rocker
switch for contactor control. Push forward for
maintained contact and back for momen tary
contact. Includes 20 ft (6 m) cord.
RCC-14 Remote Contactor and Current
Control #151 086
14-pin plug. Rotary-motion fingertip control
fastens to TIG torch using two Velcro
®
straps. Includes 28 ft (8.5 m) control cord.
RCCS-14 Remote Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973
25 ft (7.6 m)
#122 974
50 ft (15.2 m)
#122 975
75 ft (22.8 m)
14-pin plug to 14-pin socket.
Note: Not for use with Optima or 60M Series.
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack
conve niently houses
multiple XMT power
sources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of 4 XMT 456 power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
MIGRunner
™
Cart #195 445
MIGRunner
™
XL Cart #195 246
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas
cylinders, or one gas
cylinder and one
coolant system for
TIG (GTAW) welding.
Feeder mounts to tray above power source.
Universal Carrying
Cart and Cylinder
Rack #042 934
Holds power source,
and gas cylinder up
to 56 in (142.2 cm)
high mea sur ing
6 to 9 in (15.2 to 22.8 cm) in dia meter.
6
Genuine Miller Accessories
XL Cart
Regular
Cart
