OM-823 Page 3
3.
Adjusting Amperage Or Voltage
.
On some welding power
sources, the front panel output
control setting does not matter
and the Remote Hand Control
adjusts the full range of the
welding power source output.
Ref. 122 023-A / Ref. 141 127-A / 039 411-D / Ref. 159 059 / Ref. 130 214-A
Example Of Remote Amperage Control Without Output (Contactor) Control
Set Switch
Set Control
Adjust Remote Amperage
Example Of Remote Amperage Control With Output (Contactor) Control
Min
(40 A)
Max
(200 A)
In Example: Min = 40 A In Range B,
Output = 120 A (50% of 40 to 200)
Max = 200 A In Range B
Set Switches
Set Control
Min
(5 A)
Max
(200 A)
Place switch in On position for open-circuit
voltage. When switch is in Off position no
output is present.
In Example: Min = 5 A
Output = 200 A (100% of 5 to 200)
Max = 200 A
