OM-235 825 Page 19
4-13. Selecting A Location And Connecting Input Power
!
Special installation may be required
where gasoline or volatile liquids
are present
−
see NEC Article 511 or
CEC Section 20.
.
The Auto-Line circuitry in this unit auto-
matically links the power source to the
primary voltage being applied, either
115 or 230 VAC.
For 115 volts ac input power, a 20 ampere
individual branch circuit protected by time-
delay fuses or circuit breaker is required.
For 230 volts AC input power, see Section
4-9.
1
Power Cord Connector
2
Plug
−
NEMA Type 5
−
15P
3
Receptacle
−
NEMA Type 5
−
15R
(Customer Supplied)
4
Plug
−
NEMA Type 5
−
20P (Optional)
5
Receptacle
−
NEMA Type 5
−
20R
(Customer Supplied)
6
Plug
−
NEMA Type 6
−
50P
7
Receptacle
−
NEMA Type 6
−
50R
(Customer Supplied)
Select plug for power supply receptacle
available at site. Install plug onto power
cord adapter. As threaded collar is tight-
ened, push plug onto adapter until collar is
completely tight.
Connect plug to receptacle.
18 in.
(460 mm)
18 in.
(460 mm)
Ref. 803 812-C / Ref. 804 503-A
!
Do not move or operate unit
where it could tip.
!
Do Not cut off power cord connector and rewire. The power cord
connector and plugs will work with standard NEMA receptacles.
Modifying power cord, connector, and plugs will void product
warranty.
3
2
7
4
5
6
1
