Miller Electric 300 457, Owner'S Manual

Page: 3 / 5

OM − 237 279 Page 3
Description (Qty)
Part
No.
Item
No.
1 220263 Assy, Handle Running Gear (1)
2 108940 Screw, 250 − 20x .75 Hexwhd.61d Gr5 Pld (2)
3 220375 Bracket, Crossmember (1)
4 604224 Screw, 250 − 20 x .75 Hexwhd .50d Stl Pld Slffmg Tap − rw (6)
5 601965 Screw, 375 − 16 x 1.00 Hex Hd − pln Gr5 Pld (4)
6 167788 Nut, 375 − 16 .56hex .34h Stl Pld Sem Cone Wshr .88d (4)
7 235790 Rail, Base Support Rh (1)
8 135418 Axle, Running Gear .750 Dia X 25.745 (1)
9 602250 Washer, Flat .812id x 1.469odx.134t Stl Pld Ansi .750 (2)
10 220709 Wheel, Rbr Tire 10.250 Od X 3.125 Wide X .750 Bore (2)
10 238572 Wheel, Rbr Never Flat 10.250 Od X 3.125 Wide X .750 Bore (2)
11 121614 Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld (2)
12 235794 Wheel, Rbr Tire 14.500 Od X 4.750 Wide X 1.000 Bore (2)
12 237725 Wheel, Rbr Never Flat 14.500 Od X 4.750 Wide X 1.00 Bore (2)
13 235792 Axle, Wheel (Large) (1)
14 235789 Rail, Base Support Lh (1)
15 152461 Nut, 250 − 20 .44hex .23h Stl Pld Sem Cone Wshr .65d (2)
16 197930 Label, Warning Do Not Weld On Base (2)
17 145655 Ring, Rtng Ext 1.000 Shaft X .052 Thk E Style Pld (2)
18 602251 Washer, Flat1.062idx2.000odx.134t Stl Pld Ansi 1.00 (2)
Be sure to provide model when ordering replacement parts.
Assembly:
Assemble base rails, axles, and wheels
(valve stems out).
.
Install onto generator using rail
mounting hole 5 for gas models or 1 for
diesel models. Adjust to achieve prop-
er balance for application and acces-
sories.
Mount handles. Do not tighten hardware.
Install crossmember and tighten all hard-
ware.