Miller Electric 280 NT, Owner'S Manual

Page: 37 / 60

A complete Parts List is available at www.MillerWelds.com
OM-4430 Page 33
SECTION 8 − MAINTENANCE & TROUBLESHOOTING
8-1. Routine Maintenance
Follow the storage procedure in the engine owner’s manual if the unit will not be used for an extended period.
!
Stop engine before maintaining.
See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
= Check = Change = Clean = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-2
Fuel Level Oil Level Oil, Fuel Spills
Every
25
Hours
Section 8-3,
8-4
Spark Arrestor Screen Air Cleaner Wrapper
Every
50
Hours
Weld Terminals
Every
100
Hours
Engine
Manual,
Section 8-4,
8-5
Battery Terminals Cooling System Oil Air Cleaner Element
Every
200
Hours
Engine
Manual,
Section 8-5
Unreadable Labels Spark Plug Gap Oil Filter Fuel Filter
Every
500
Hours
Weld Cables Slip Rings*
Brushes*