background image

HV-3C

 

 

 

 

 

WARRANTY

Millennia Media will repair this product, free of charge, in the USA, in the event of defect of 
materials or workmanship for one (1) year following date of purchase. This warranty is ex-

tended only to the original purchaser. This limited warranty covers failures due only to defects 
in materials and workmanship which occur during normal, intended use and does not cover 

damage which occurs in shipment or failures which are caused by products not supplied by Mil-

lennia Media. This limited warranty does not cover failures which arise from accident, misuse, 
abuse, neglect, mishandling, misapplication, faulty installation, improper adjustment, alteration 

or modification of product, incompatibilities, line-power surges, acts of God, or service per-
formed by anyone other than Millennia Media or its authorized agent. Vacuum tube failures are 

not covered under warranty.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above. Millennia Media shall not be liable for 
special, subsequent, incidental, consequential, or punitive damages, including, but not limited 

to: damage to recordings, microphones, mixing consoles, or any associated equipment, down-
time costs, loss of goodwill, or claims of any party dealing with purchaser for such damages re-
sulting from the use of this product. All warranties, express and implied, including the warran-
ties of merchantability and fitness for a particular purpose are limited to the applicable warranty 
period set forth above.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or 
length of time an implied warranty remains in effect. As such, the above exclusions may not ap-
ply. This warranty gives you specific legal rights and you may also have other rights which can 
vary from state to state.

MUSIC & MEDIA SYSTEMS

Millennia Media, Inc.  

4200-B Day Spring Court

Placerville, CA 95667-9500

T 530-647-0750

F 530-647-9921

[email protected]

http://www.mil-media.com

The HV-3C is hand-crafted in the USA

Manual printed in the USA

Toll Free 1-866-MIC-PREAMP

Summary of Contents for HV-3C













Reviews: