SAFETY INSTRUCTIONS
2
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. DO NOT OPERATE THIS UNIT WITH THE METAL CHASSIS COVER
REMOVED.
1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for
future reference. It is important that you adhere to any warnings and follow all instructions as
they pertain to the operation of this unit.
2. Install this unit in a cool, dry, clean place - away from windows, heat sources, sources of
excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers,
motors). To prevent fire or electrical shock, do not expose the unit to rain and water.
3. This unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the unit. Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from the
unit.
4. It is recommended that the power cord of this unit be unplugged from the outlet when left
unused for long periods of time.
5. Do not use force on switches, controls or connection wires. When moving the unit, first disco-
nect the power plug and the wires connected to other equipment. Never pull the wires them-
selves.
6. Care should be taken so that objects do not fall into and liquids are not spilled inside the unit.
7. This unit should be serviced by qualified service personnel when:
a. Objects have fallen, or liquid has been spilled into the unit; or
b. The unit has been exposed to rain; or
c. The unit does not appear to operate normally or exhibits a marked change in
performance; or
d. The unit has been dropped, or the cabinet damaged.
8. The user should not attempt to service this unit beyond those means described in the operat-
ing instructions. All other servicing should be referred to qualified service personnel.
9. Precautions should be taken so that the grounding or polarization is not defeated.
10. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a
clean, dry cloth.
11. Be sure to read the "TROUBLESHOOTING" section regarding common operating errors
before concluding that the unit is faulty.
CAUTION: TO REDUCE THE RISK OF
ELECTRONIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
