Talisman III Dynamic Loop Amplifier Systems (TAL/DLS1/3 & TAL/DLS5/3)
Publication Code TAL-DLS-3_TIG Issue 3
Page 3
1.
INSTALLATION
1.1
Precautions
IMPORTANT: Before operating the PAC Amplifier please take note of the following points:
1.1.1
Ensure that the equipment is connected to a suitable mains supply. The equipment is supplied configured
for 230V 50/60Hz AC operation.
1.1.2
For mains connections other than the UK, refer to the local requirements for connections to supply.
1.1.3
Always ensure that the equipment is properly earthed (grounded). Operating without an earth is dangerous
and may cause high levels of audible hum from the loudspeaker outputs.
1.1.4
Avoid siting the equipment in locations exposed to direct sunlight, near heaters or other heat sources. Avoid
locations with high humidity or dust levels. Do not obstruct the ventilation slots in the amplifier case and, if
the amplifier is rack-mounted, ensure that a 1U ventilation panel is fitted above the unit.
1.1.5
Never remove the top cover of the amplifier with the AC mains supply connected. All internal servicing
should be performed by a competent / qualified engineer.
1.1.6
Never make an internal adjustment when the AC supply is connected.
Fuse Holder
IEC Mains Inlet Socket
13A Mains Plug Wiring (UK only)
Green/Yellow
Earth
Blue
Neutral
Brown
Live
Fuse
5A Max.
