If the batteries are low, the red light (in the left) will warn you immediately. To test
the batteries, just input your personal numbers to open the door. If the batteries
are low, the red light will be on. If nothing happens, it means that the batteries
are in order
5. BATTERY REPLACEMENT WARNING
The safe requires 4×size “AA” (1.5V) batteries. Open the safe, remove the
battery cover plate “Y” (see diagram 1) on the back of the door and replace the
4 PCS old batteries. You must reprogram the code, using the above third step.
Use of alkaline batteries is recommended.
For your convenience, we have engineered a manual override system for your
safe. If you forget or misplace your combination, remove the small central
rubber cover “Z “(see diagram 2) between knob and keypad, insert the key into
the keyhole and turn it in a counter-clockwise direction, then turn the knob in a
clockwise direction towards the right. This will manually open your safe at any
time.
To reduce the risk of theft of the safe, it can be secured to floor, wall or in a
cupboard. For your convenience, there are holes (diameter 8mm) both in the
bottom and on the back; therefore it can be fixed by the expansion bolts supplied.
CAUTION:
The safe should be placed horizontally when installing the safe.
6. REPLACING THE BATTERIES
7. OVERRIDE INSTRUCTION TO OPEN THE SAFE
8. INSTALLING THE SAFE
We offer a warranty on our products in accordance with the legislation in effect
in each country. (Proof of purchase must be presented/submitted.)
We provide service and repair free of charge during the warranty period in
accordance with the Danish Sale of Goods Act and on the following terms.
1. The fault is a design or material fault (this does not include normal
wear and tear and misuse).
2. Repair has not been attempted by anyone other than Millarco's
approved service workshops
3. No non-original parts have been used on the product
Free service covers replacement of defective parts and man hours.
The product is to be returned to the place of purchase, and the store will send
it in for service. We do not accept products for repair or warranty obligations
directly from the customer.
Should technical questions arise, you are naturally welcome to contact our
service workshop:
Millarco International A/S, Rokhøj 26, DK - 8520 Lystrup
Service phone: +45 8743 4233
E-mail: [email protected]
Service & Reparation
Technical Data
Outer dimension
Height
Width
Depth
Model 25.806 - SFT-20ENP 200mm.
310mm.
200mm.
Model 25.800 - SFT-25ENP 250mm.
350mm.
250mm.
Model 25.802 - SFT-30ENP 200mm.
380mm.
300mm.
Model 25.804 - SFT-503530EN 500mm.
350mm.
300mm.
Model 25.808 - SFT-35EN
205mm.
450mm.
3850mm.
Place and date:
Lystrup, 22.marts 2013
Signed: Lars Bærentsen
DK-8520 Lystrup
www.millarco.dk
