5
millheat.com
EN
Instructions
1. Indicator light
2. Thermostat
3. Output selector
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
JA1000
JA1500
JA2000
0: AV
I: 400W
II: 600W
III: 1000W
0: AV
I: 600W
II: 900W
III: 1500W
0: AV
I: 800W
II: 1200W
III: 2000W
1. Set the heater to OFF. Plug the heater into a grounded outlet.
2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum
position. When the desired room temperature has been reached, turn the
thermostat slowly down until you hear a click. The thermostat can now remain in
s soon as the room
temperature falls below this level, the heater will automatically switch on again.
When the room has again reached the desired temperature, the heater will switch
3. If you wish to change the room temperature, repeat the instructions in step 2.
4.
become extremely hot.
5.
Usage
Assembly
1. Remove the pre-mounted screws on both legs before you insert them into the
brackets, so that you get a stable foot.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
4. Two screws must be fastened on each foot bracket.
5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
Control panel