•
Avoid using extension cords, which may overheat and could
possibly start a fire.
•
Never cover the air vents on the heater. Avoid potential fire
hazards by making sure the air intakes are not blocked or
covered.
•
The product should not be installed in close proximity to
flammable materials of any kind because there can always
be a risk of fire.
•
The product must never be used in rooms where gasoline,
paint or other flammable liquids are stored, such as in a gar-
age.
•
The product has an IP rating of IP25.
•
Do not touch the heating lamp with bare fingers. If the heat-
ing lamp has been touched in connection with a fault, any
fingerprints have to be wiped off using a soft cloth mois-
tened with denatured alcohol. The fingerprints leave grease
which can burn to the heating lamp. This shortens the ser-
vice life of the heating lamp.
•
Make sure that the product is installed in a safe manner and
is mounted securely to the ceiling.
•
Never touch an electric heater with wet hands.
•
The product becomes hot when it is on. Therefore, be careful
and avoid burning or scorching your skin.
•
The product must be switched off, the plug removed and the
product must cool down before it is moved.
•
Avoid overloading the mains (the circuit) where the product
is connected. The product may overload the electrical circuit
if other electrical devices are plugged into the same socket
outlet.
EN
5
millnorway.com