Page 7
7. Connecting tube with water pipe
Before every SWITCH ON pasteurizer must be connected on water pipe, water collector or cooling system. For connetion
has to be used tube with universal rubber connector.
8. Turn on the water to fill the kettle with cooling water
Open the water valve that much that water connection stays on the valve.
ATTENTION
Open slowly the valve for cold water and only that much that rubber connector stays on the pipe – such water flow is
sufficient and economical. If we increase water flow then rubber connector falls from the pipe. Higher water flow will not
shorten time of cooling, it will only enlarge use of water which is not economical.
