background image

7 Line

 Fold Down Clothesline

MCL13046

2 x Wall Brackets

2 x Front Bars

Contents

Your carton should contain the following parts:

2 x Side Arms (assembled)

1 x Front Brace 

1 x Accessories Bag

1 x Line Cord

Wall 

Bracket

Line Cord

Telescopic

Strut

Side Arm

Front Bar

Front Brace

Line

Tensioner

- Tape Measure

- Timber or Masonry Drill Bits

- Pencil

Required

Tools

- Drill / Hammer drill (ideal)

- Spanner

Optional

- Spirit Level

- Hack Saw (if shortening width)

The recommended mounting height of the top slotted hole in the wall bracket is:

 

USERS  10cm.

 Minimum height is 160cm. 

Choosing a Suitable Location

Installation and Assembly

If you are using a Milkcan Ground Mount Kit, skip steps 1 & 2 and refer to instructions inside the ground mount kit packaging.

1. Mark position of wall brackets to an overall width of 240cm between centres. If your required width is less than 240cm, please refer to 

Reducing the Overall Width below.

3.0

www.milkcan.com.au

[email protected]

(03) 9464 6964

56 Northgate Drive,
Thomastown VIC 3043

20cm

20cm

Reducing the Overall Width

If your available space doesn’t allow the full 240cm 

width, you can reduce the width of your Clothesline as 

follows:

-   For this example, we are assuming your required 

overall width is 200cm. This is a total reduction of 

40cm.

-   Cut half from each side of the 2 x cross bar 

segments i.e. 40 / 2 = 20cm each side

The cuts will be 

covered by the 

cross brace

Reviews: