Charge steps:
1 Install battery (15);
3 Connect A/C adapter;
4 Start charging;
5 Charge may last 3.5 hours.
LED light From left to right
1st LED lights up power < 25% 2nd LED lights up power 25-50%
3th LED lights up power 50-75% 4th LED lights up power 75-100%
Projector Operation Procedure
Diagram 1
Diagram 2
1. Connect Power cable as diagram 1;
2. Turn on Power Button (12);
3. Play external AV program acquiescently;
4. Touch “ ” button to switch to PC program, ensuring the PC solution is
640X480;
5. Touch the Power button to turn off the projection function.
Power
This projector can use external power or battery for power supply.
Note: If both external power and battery are available, projector will select
external power as default power supply.
External power connection (See diagram 1).
Battery connection (See diagram2).
Battery Installation and Charge
1. Insert the Battery Module along the Battery slot with electrical contacts;
facing downward and thinner side facing the front;
2. Adjust Battery to ensure proper contact.
Battery Charge
